18
2. Press the HOLD button again to turn the function “off.” The
HOLD icon will disappear, and the value will no longer be
“locked” in the display.
NOTE: The data HOLD function is not available for the DIODE
TEST, CONTINUITY TEST or PULSE WIDTH MEASUREMENT.
B. MINIMUM/MAXIMUM VALUE FUNCTION
The MAX/MIN function records and saves the maximum and/or
minimum readings that were achieved during a test.
1. Prepare the tester to perform the desired test as follows
(refer to the detailed TESTING PROCEDURES starting on
page 10 for the specific connections and settings for the test
you wish to perform):
Plug the test leads into the appropriate jacks.
Set the tester’s Function/Range Selector Switch to the
appropriate position.
Connect the test leads to the item to be tested.
2. To record Maximum/Minimum readings, press and release
the MAX/MIN button to place the tester in MAX/MIN mode.
The MAX icon will be visible on the display. Perform the
desired test; the maximum reading achieved during the test
will be recorded and saved in the tester’s memory.
3. Press the MAX/MIN button again. The MIN icon will be
visible on the display. Perform the desired test; the minimum
reading achieved during the test will be recorded and saved
in the tester’s memory.
To scroll between MAX and MIN readings that are
stored in the tester’s memory, rapidly press and release
the MAX/MIN button.
4. To exit MAX/MIN mode press and hold MAX/MIN button for
approximately 2-3 seconds, or until MAX/MIN icons
disappear from the display.
The tester will save the MAX/MIN readings in memory until
the MAX/MIN mode is exited or the tester is turned off.
NOTE: MAX/MIN functions is not applicable to the Diode,
Continuity or Frequency Functions.
BATTERY AND FUSE REPLACEMENT
1. Turn the Digital Automotive Tester “OFF” and remove the
test leads.
2. Replace the fuse or battery as necessary:
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels